D-Link DGS-3620-52T CLI Guide - Page 602
delete link_aggregation group_id, config link_aggregation group_id
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 602 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 52-2 delete link_aggregation group_id Description This command is used to delete a previously configured link aggregation group. Format delete link_aggregation group_id Parameters - Specify the group ID. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To delete a link aggregation group: DGS-3620-28SC:admin#delete link_aggregation group_id 3 Command: delete link_aggregation group_id 3 Success. DGS-3620-28SC:admin# 52-3 config link_aggregation group_id Description This command allows you to configure a link aggregation group that was created with the create link_aggregation command above. Format config link_aggregation group_id {master_port | ports | state [enable | disable]} (1) Parameters - Specify the group ID. The group number identifies each of the groups. The switch allows up to 32 link aggregation groups to be configured. master_port - Specify which port (by port number) of the link aggregation group will be the master port. All of the ports in a link aggregation group will share the port configuration with the master port. - Specify the master port ID. ports - Specify a range of ports that will belong to the link aggregation group. The port list should include the master port. - Specify a range of ports to be configured. state - Enable or disable the specified link aggregation group. If LACP group state is enabled and 597