D-Link DGS-3620-52T CLI Guide - Page 116
Optional Specifies the VLAN name.
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide {user_define {mask }}]} | ipv6 {class | source_ipv6 {mask } | destination_ipv6 {mask } | [tcp {src_port {mask } | dst_port {mask }} | udp {src_port {mask } | dst_port {mask }} | icmp {type | code }]}] [vlan_based [vlan | vlan_id ] | port_group [id | name ] | port ] [permit {replace_priority_with | replace_dscp_with | counter [enable | disable]} | deny] {time_range } | delete access_id ] Parameters profile_id - Specifies the index of the egress access list profile. - Enter the profile ID used here. This value must be between 1 and 4. profile_name - Specifies the name of the profile. - Enter the profile name here. This name can be up to 32 characters long. add - Specifies to add a profile or rule. access_id - Specifies the index of the access list entry. If the auto_assign option is selected, the access ID is automatically assigned. The lower the access ID, the higher the priority. auto assign - Specifies that the access ID will be configured automatically. - Enter the access ID used here. This value must be between 1 and 128. ethernet - Specifies an Ethernet egress ACL rule. vlan - (Optional) Specifies the VLAN name. - Enter the VLAN name used for this configuration here. This name can be up to 32 characters long. vlanid - Specifies a VLAN ID. - Enter the VLAN ID used for this congfiguration here. This value must be between 1 and 4094. mask - (Optional) Specifies the mask used. - Enter the mask value used here. source_mac - (Optional) Specifies the source MAC address. - Enter the source MAC address used here. mask - Specifies that source MAC mask used. - Enter the source MAC mask value here. destination_mac - Specifies the destination MAC address. - Enter the destination MAC address used here. mask - Specifies that destination MAC mask used. - Enter the destination MAC mask value here. 802.1p - (Optional) Specifies the value of the 802.1p priority tag. The priority tag ranges from 1 to 7. - Enter the 802.1p priority tag used here. ethernet_type - (Optional) Specifies the Ethernet type. - Enter the Ethernet type mask used here. ip - Specifies an IP egress ACL rule. vlan - (Optional) Specifies the VLAN name. - Enter the VLAN name used for this configuration here. This name can be up to 32 characters long. vlanid - Specifies a VLAN ID. - Enter the VLAN ID used for this congfiguration here. This value must be between 1 and 4094. mask - (Optional) Specifies the mask used. - Enter the mask value used here. source_ip - (Optional) Specifies an IP source address. - Enter the source IP address used here. mask - Specifies the source IP address used here. - Enter the source network mask here. destination_ip - (Optional) Specifies an IP destination address. - Enter the destination IP address used here. 111