D-Link DGS-3620-52T CLI Guide - Page 707
show mld
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 707 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide disable - Specifies that the MLD state for the specified interface will be disabled. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the MLD on the IP interface "System": DGS-3620-28SC:admin# config mld ipif System version 1 state enabled Command: config mld ipif System version 1 state enabled Success. DGS-3620-28SC:admin# To configure the MLD version to v1 on all IP interfaces: DGS-3620-28SC:admin# config mld all version 1 Command: config mld all version 1 Success. DGS-3620-28SC:admin# To configure the MLD last listener query interval to 10 seconds on all interfaces: DGS-3620-28SC:admin# config mld all last_listener_query_interval 10 Command: config mld all last_listener_query_interval 10 Success. DGS-3620-28SC:admin# 64-2 show mld Description This command is used to display the MLD configurations on the Switch. Format show mld {ipif } Parameters ipif - (Optional) Specifies the IP interface name used for this configuration. - Enter the IP interface name used here. This name can be up to 12 characters long. If no parameter is specified, the system will display all MLD configurations. 702