D-Link DGS-3620-52T CLI Guide - Page 1126

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 802.1X RADIUS Log Message: Port link down Parameters description: unitID: 1.Interger value;2.Represent the id of the device in the stacking system. portNum: 1.Interger value;2.Represent the logic port number of the device. Event description: 802.1X Authentication failure. Log Message: 802.1X Authentication failure [for ] from (Username: , Port: , MAC: ) Parameters description: reason: The reason for the failed authentication. Warning username: The user that is being authenticated. unitID: The unit ID. portNum: The switch port number. macaddr: The MAC address of thr authenticated device. Event description: 802.1X Authentication successful. Log Message: 802.1X Authentication successful from (Username: , Port: , MAC: ) Parameters description: username: The user that is being authenticated. unitID: The unit ID. portNum: The switch port number. macaddr: The MAC address of the authenticated device. Event description: VID assigned from RADIUS server after RADIUS client is authenticated by RADIUS server successfully .This VID will be assigned to the port and this port will be the VLAN untagged port member. Log Message: RADIUS server assigned VID : to port (account : ) Informational Parameters description: ipaddr: The IP address of the RADIUS server. vlanID: The VID of RADIUS assigned VLAN. unitID: The unit ID. portNum: The port number. Username: The user that is being authenticated. Event description: Ingress bandwidth assigned from RADIUS server after RADIUS client is authenticated by RADIUS server successfully .This Ingress bandwidth will be assigned to the port. Log Message: RADIUS server assigned ingress bandwith : to port (account : ) Informational Informational 1121