D-Link DGS-3620-52T CLI Guide - Page 175
<ipaddr>
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide default_originate: If this setting is enabled, it will allow a BGP speaker (the local router) to send the default route 0.0.0.0/0 to a neighbor to use as the default route. If route map is specified, the default route will be injected if the route map contains a match IP address statement. If this setting is disabled, no default route will be sent to the neighbor. The default setting is disabled. Format config bgp neighbor general [ | peer_group ] {ebgp_multihop | weight [ | default] | update_source [add | delete] ipif | send_community [standard | none] | next_hop_self [enable | disable] | soft_reconfiguration_inbound [enable | disable] | remove_private_as [enable | disable] | allowas_in [enable {} | disable] | default_originate [enable {route_map } | disable]}(1) Parameters - Specifies the IP address of the neighbor to be configured. peer_group - Specifies the peer group to be configured. - Enter the peer group name here. This name can be up to 16 characters long. ebgp_multihop - (Optional) Specifies the TTL of BGP packet sent to the neighbor. For an EBGP neighbor the default setting is 1. This means only direct connected neighbors are allowed. - Enter the EBGP multi-hop value used here. This value must be between 1 and 255. weight - (Optional) The valid range is from 0 to 65535. If this is not specified, the routes learned through another BGP peer will have a default weight of 0. Routes sourced by the local router have a weight of 32768. It cannot be changed. value - Enter the weight value used here. This value must be between 0 and 65535. default - Specifies that the default weight value will be used. update_source - (Optional) Specifies an interface to be used by BGP sessions for the TCP connection. By default, this parameter is not set. add - Specifies to add an interface. delete - Specifies to delete an interface. ipif - (Optional) Specifies the IP interface name used. - Enter the IP interface name used here. This name can be up to 12 characters long. send_community - (Optional) This specifies the communities attribute to be sent to the BGP neighbor. standard - Only standard communities will be sent. none - No communities will be sent. The default value is none. next_hop_self - (Optional) Enable or disable the next hop self attribute. By default, this setting is disabled. enable - Specifies that the next-hop-self attribute will be enabled. disable - Specifies that the next-hop-self attribute will be disabled. soft_reconfiguration_inbound - (Optional) Specifies to enable or disable the inbound soft reconfiguration function. By default, this setting is disabled. enable - Specifies that the soft re-configuration inbound option will be enabled. disable - Specifies that the soft re-configuration inbound option will be disabled. remove_private_as - (Optional) If this setting is set to enable, the private AS number in the AS path attribute of the BGP update packets will be dropped. By default, the setting is disabled. enable - Specifies that the 'remove private AS' option will be enabled. disable - Specifies that the 'remove private AS' option will be disabled. allowas_in - (Optional) If the allow_as setting is enabled, the BGP router's self AS is allowed in the AS path list. By default, the allow_as setting is disabled. If no number is supplied, the default value of 3 times is used. 170