D-Link DGS-3620-52T CLI Guide - Page 506
clear ip prefix_list counter
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 506 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters - (Optional) Enter the name of the access list used here. This name can be up to 16 characters long. If no parameter is specified, all access lists on the Switch will be displayed. Restrictions None. Example To display the information of an access list named "List1": DGS-3620-28SC:admin#show ip standard access_list List1 Command: show ip standard access_list List1 IP standard Access_list: List1 Total entries number : 1 filter : permit 10.1.1.1/8 DGS-3620-28SC:admin# 42-9 clear ip prefix_list counter Description This command is used to clear prefix list hit counters. The hit count is a value indicating the number of matches to a specific prefix list entry. Format clear ip prefix_list counter [ {} | all] Parameters - Enter the name of the prefix list from which the hit count is to be cleared. This name can be up to 16 characters long. - (Optional) Enter the IPv4 network address used here that will be used to clear the hit count. all - Specifies that all the prefix list counters will be cleared. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To clear prefix list counters for the prefix list named "first_list" that matches the 192.168.10.0/24 prefix: 501