D-Link DGS-3620-52T CLI Guide - Page 279
debug stp config ports, debug stp show counter
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 20-10 debug stp config ports Description This command used to configure per-port STP debug level on the specified ports. Format debug stp config ports [ | all] [event | bpdu | state_machine | all] state [disable | brief | detail] Parameters ports - Specifies the STP port range to debug. - Enter the list of port used for this configuration here. all - Specifies to debug all ports on the switch. event - Debug the external operation and event processing. bpdu - Debug the BPDU's that have been received and transmitted. state_machine - Debug the state change of the STP state machine. all - Debug all of the above. state - Specifies the state of the debug mechanism. disable - Disables the debug mechanism. brief - Sets the debug level to brief. detail - Sets the debug level to detail. Restrictions Only Administrator level users can issue this command. Example To configure all STP debug flags to brief level on all ports: DGS-3620-28SC:admin# debug stp config ports all all state brief Command: debug stp config ports all all state brief Success. DGS-3620-28SC:admin# 20-11 debug stp show counter Description This command used to display the STP counters. Format debug stp show counter {ports [ | all]} Parameters ports - (Optional) Specifies the STP ports for display. - Enter the list of port used for this configuration here. 274