D-Link DGS-3620-52T CLI Guide - Page 502
delete ip prefix_list
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 502 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide - Specifies the network address used. ge - (Optional) Specifies the minimum prefix length to be matched. - Enter the 'ge' value used here. This value must be between 1 and 32. le - (Optional) Specifies the maximum prefix length to be matched. - Enter the 'le' value used here. This value must be between 1 and 32. deny - Specifies that the network will be denied. permit - Specifies that the network will be permitted. description - Specifies the description for the prefix list used. - Enter the description used here. This value can be up to 80 characters long. clear_description - Specifies that the description for the prefix list will be cleared. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example The following example configures a prefix list 1 to permit routes from the 10.0.0.0/8 network that have a mask length that is less than or equal to 24 bits: DGS-3620-28SC:admin# config ip prefix_list 1 add 10.0.0.0/8 le 24 permit Command: config ip prefix_list 1 add 10.0.0.0/8 le 24 permit Success. DGS-3620-28SC:admin# 42-3 delete ip prefix_list Description This command is used to delete the IP prefix list Format delete ip prefix_list [list_name | all] Parameters list_name - Specifies the prefix list name that will be deleted. - Enter the prefix list name that will be deleted here. This name must be 16 characters long. all - Specifies that all the entries will be deleted. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To delete an IP prefix list named "list1": 497