D-Link DGS-3620-52T CLI Guide - Page 1073

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 105-7 config voice_vlan aging_time Description This command is used to set the aging time of the voice VLAN. The aging time is used to remove a port from voice VLAN if the port is an automatic VLAN member. When the last voice device stops sending traffic and the MAC address of this voice device is aged out, the voice VLAN aging timer will be started. The port will be removed from the voice VLAN after expiration of voice VLAN aging timer. If the voice traffic resumes during the aging time, the aging timer will be reset and stop. Format config voice_vlan aging_time Parameters - Specify the aging time. The range is 1 to 65535 minutes. The default value is 720 minutes. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To set 60 minutes as the aging time of voice VLAN: DGS-3620-28SC:admin#config voice_vlan aging_time 60 Command: config voice_vlan aging_time 60 Success. DGS-3620-28SC:admin# 105-8 show voice_vlan Description This command is used to display voice VLAN global information. Format show voice_vlan Parameters None. Restrictions None. 1068