D-Link DGS-3620-52T CLI Guide - Page 808

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 73-4 show pim neighbor Description This command is used to display the current PIM neighbor router table. Format show pim neighbor {ipif | ipaddress } Parameters ipif - (Optional) Specifies the name of the IP interface for which you want to display the current PIM neighbor router table. - Enter the IP interface name used here. This name can be up to 12 characters long. ipaddress - (Optional) Specifies the IP address and netmask of the destination. - Enter the destination IP address used here. If no parameter is specified, the system will display all the PIM neighbor addresses in the table. Restrictions None. Example To display PIM neighbor address table: DGS-3620-28SC:admin# show pim neighbor Command: show pim neighbor PIM Neighbor Address Table Interface Name Neighbor Address System 10.48.74.122 Expired Time -----------5 Total Entries : 1 DGS-3620-28SC:admin# 73-5 show pim Description This command is used to display the current PIM configuration. Format show pim {ipif } Parameters ipif - (Optional) Specifies the name of the IP interface used to display the PIM configuration. 803