D-Link DGS-3620-52T CLI Guide - Page 87
delete access_profile, config access_profile
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# DGS-3620-28SC:admin#create access_profile profile_id 2 profile_name 2 ip vlan source_ip_mask 255.255.255.255 destination_ip_mask 255.255.255.0 dscp icmp Command: create access_profile profile_id 2 profile_name 2 ip vlan source_ip_mask 255.255.255.255 destination_ip_mask 255.255.255.0 dscp icmp Success. DGS-3620-28SC:admin# 5-2 delete access_profile Description This command is used to delete access list profiles. Format delete access_profile [profile_id | profile_name | all] Parameters profile_id - Specify the index of the access list profile. - Specify the index of the access list profile. Enter a value between 1 and 6. profile_name - Specify the profile name. - Specify the profile name. The maximum length is 32 characters. all - Specify the whole access list profile to delete. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To delete access list profiles: DGS-3620-28SC:admin#delete access_profile profile_id 1 Command: delete access_profile profile_id 1 Success. DGS-3620-28SC:admin# 5-3 config access_profile Description This command is used to configure access list entries. Note: Please see the "Error! Reference source not found. Error! Reference source not found." section for a configuration example and further information. 82