D-Link DGS-3620-52T CLI Guide - Page 716

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions Only Administrator and Operator-level users can issue this command. Example To enable SNMP: DGS-3620-28SC:admin#enable snmp Command: enable snmp Success. DGS-3620-28SC:admin# 66-2 disable snmp Description This command is used to disable the SNMP function. When SNMP function is disabled, the network manager will not be able to access SNMP MIB objects. The device will not send traps or notification to network manager either. Format disable snmp Parameters None. By default, SNMP is disabled. Restrictions Only Administrator and Operator-level users can issue this command. Example To disable SNMP: DGS-3620-28SC:admin#disable snmp Command: disable snmp Success. DGS-3620-28SC:admin# 66-3 create trusted_host Description This command is used to create the trusted host. The switch allows you to specify up to twenty IP addresses (or IP ranges) that are allowed to manage the switch via in-band SNMP or Telnet based management software. These IP addresses must be members of the Management VLAN. If no IP 711