D-Link DGS-3620-52T CLI Guide - Page 234
cfm linktrace
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# 15-19 cfm linktrace Description This command is used to issue a CFM link track message. Format cfm linktrace [mepname | mepid md [ | md_index ] ma [ | ma_index ]] {ttl | pdu_priority } Parameters - Specify the destination MAC address. mepname - Specify the MEP name. - Specify the MEP name. The maximum length is 32 characters. mepid - (Optional) Specify the MEPID. - Specify the MEP MEPID between 1 and 8191. md - (Optional) Specify the maintenance domain name. - Specify the maintenance domain name. The maximum length is 22 characters. md_index - Specifies the MD index value used. - Enter the MD index value used here. This value must be between 1 and 4294967295. ma - (Optional) Specify the maintenance association name. - Specify the maintenance association name. The maximum length is 22 characters. ma_index - Specifies the MA index value used. - Enter the MA index value used here. This value must be between 1 and 4294967295. ttl - (Optional) Specify the link trace message TTL value. The default value is 64. - Specify the link trace message TTL value. Enter a value between 2 and 255. pdu_priority - (Optional) Specify the 802.1p priority to be set in the transmitted LBMs. If not specified, it uses the same priority as CCMs and LTMs sent by the MA. - Specify the 802.1p priority to be set in the transmitted LBMs. If not specified, it uses the same priority as CCMs and LTMs sent by the MA. Enter a value between 0 and 7. Restrictions None. (EI Mode Only Command) Example To transmit a LTM: DGS-3620-28SC:admin#cfm linktrace 00-01-02-03-04-05 mepname mep1 Command: cfm linktrace 00-01-02-03-04-05 mepname mep1 Transaction ID: 26 Success. DGS-3620-28SC:admin# 229