D-Link DGS-3620-52T CLI Guide - Page 203
show bgp confederation, config bgp trap
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 12-50 show bgp confederation Description This command is used to display the confederation configuration of BGP. Format show bgp confederation Parameters None. Restrictions None. (EI Mode Only Command) Example This example displays the BGP confederation setting: DGS-3620-28SC:admin# show bgp confederation Command: show bgp confederation BGP as number : 65501 Confederation identifier : 10 Confederation Peer : 65502,65503 Neighbor list: IP address Remote AS number 192.168.1.1 65502 192.168.1.2 65503 192.168.1.3 65501 DGS-3620-28SC:admin# 12-51 config bgp trap Description This command is used to configure the BGP trap state. Format config bgp trap [peer_established | peer_idle | all] [enable | disable] Parameters peer_established - Enable or disable the sending of the peer established trap. This default value is disabled. peer_idle - Enable or disable the sending of the peer idle trap. This default value is disabled. 198