D-Link DGS-3620-52T CLI Guide - Page 1041
download firmware_fromRCP
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1041 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To download a configuration file from an RCP server: DGS-3620-28SC:admin#download cfg_fromRCP username rcp_user 172.18.212.106 src_file /home/DGS-3620.cfg Command: download cfg_fromRCP username rcp_user 172.18.212.106 src_file /home/DGS-3620.cfg Connecting to server Done. Download configuration Done. DGS-3620-28SC:admin# 103-3 download firmware_fromRCP Description This command is used to download a firmware file from a Remote Copy Protocol (RCP) server.. Format download firmware_fromRCP [{username } {} src_file | rcp: ] {[unit | all]} {dest_file } {boot_up} Parameters username - (Optional) Specify the remote user name on the RCP server. - Specify the remote user name on the RCP server. - (Optional) Specify the IP address of the RCP server. src_file - Specify the path name on the RCP server or local. Note: If a user specifies the relative file path, the path search strategy depends on the server system. - Specify the path name on the RCP server or local. Note: If a user specifies the relative file path, the path search strategy depends on the server system. rcp: - Syntax: rcp: username@ipaddr/directory/filename. Example for full path: [email protected]/home/user_name/desxxxx.had; Example for relative path: [email protected]./desxxxx.had; Example for omitted user name in RCP string: 10.1.1.1./desxxxx.had. Note: No spaces are allowed in the . - Syntax: rcp: username@ipaddr/directory/filename. Example for full path: [email protected]/home/user_name/desxxxx.had; Example for relative path: [email protected]./desxxxx.had; Example for omitted user name in RCP string: 10.1.1.1./desxxxx.had. Note: No spaces are allowed in the . unit - Specifies which unit on the stacking system. If it is not specified, it refers to the master unit. - Enter the unit ID used here. This value must be between 1 and 12. all - Specifies that all the units in the stacking system will be used. dest_file - (Optional) Specify the path and file name of the destination file on the device. - Specify the path and file name of the destination file. boot_up - Specifies it as a boot up file. Restrictions Only Administrator-level users can issue this command. Example To download firmware from an RCP server: 1036