D-Link DGS-3620-52T CLI Guide - Page 559

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Using the JWAC function, PC users need to pass two stages of authentication. The first stage is to do the authentication with the quarantine server and the second stage is the authentication with the switch. For the second stage, the authentication is similar to WAC, except that there is no port VLAN membership change by JWAC after a host passes authentication. The RADIUS server will share the server configuration defined by the 802.1X command set. Format enable jwac Parameters None. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To enable JWAC: DGS-3620-28SC:admin#enable jwac Command: enable jwac Success. DGS-3620-28SC:admin# 47-2 disable jwac Description This command is used to disable JWAC. Format disable jwac Parameters None. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To disable JWAC: 554