D-Link DGS-3620-52T CLI Guide - Page 241
show cfm remote_mep
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 15-27 show cfm remote_mep Description This command is used to display CFM remote MEP information. Format show cfm remote_mep [mepname | md [ | md_index ] ma [ | ma_index ] mepid ] remote_mepid Parameters mepname - Specify the MEP name. - Specify the MEP name. The maximum length is 32 characters. md - Specify the maintenance domain name. - Specify the maintenance domain name. The maximum length is 22 characters. md_index - Specify the maintenance domain index. - Enter the maintenance domain index value here. This value must be between 1 and 4294967295. ma - Specify the maintenance association name. - Specify the maintenance association name. The maximum length is 22 characters. ma_index - Specify the maintenance association index. - Enter the maintenance association index value here. This value must be between 1 and 4294967295. mepid - Specify the MEPID. - Specify the MEP MEPID between 1 and 8191. remote_mepid - Specify the remote MEPID. - Specify the remote MEPID between 1 and 8191. Restrictions None. (EI Mode Only Command) Example To display CFM remote MEP information: DGS-3620-28SC:admin#show cfm remote_mep mepname mep1 remote_mepid 2 Command: show cfm remote_mep mepname mep1 remote_mepid 2 Remote MEPID : 2 MAC Address : 00-11-22-33-44-02 Status : OK RDI : Yes Port State : Blocked Interface Name : Down Last CCM Serial Number : 1000 Send Chassis ID : 00-11-22-33-44-00 Sender Management Address: SNMP-UDP-IPv4 10.90.90.90:161 Detect Time : 2008-01-01 236