D-Link DGS-3620-52T CLI Guide - Page 275

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide long. Restrictions Only Administrator level users can issue this command. Example To show the debug buffer's state: DGS-3620-28SC:admin# debug buffer utilization Command: debug buffer utilization Allocate from : Total size : Utilization rate : System memory 2 MB 30% DGS-3620-28SC:admin# To clear the debug buffer: DGS-3620-28SC:admin# debug buffer clear Command: debug buffer clear Success. DGS-3620-28SC:admin# To upload the messages stored in debug buffer to TFTP server: DGS-3620-28SC:admin# debug buffer upload_toTFTP 10.0.0.90 debugcontent.txt Command: debug buffer upload_toTFTP 10.0.0.90 debugcontent.txt Connecting to server Done. Upload configuration Done. DGS-3620-28SC:admin# 20-5 debug output Description Use the command to set a specified module's debug message output to debug buffer or local console. If the user uses the command in a Telnet session, the error message also is output to the local console. Note: When selecting to output to the debug buffer and there are debug messages being outputted, the system memory pool will be used as the debug buffer. The functions which will use the system memory pool resource may fail to execute command such as download and upload firmware, or save configuration. If you want to execute these commands successfully, please use the command "debug buffer clear" to release the system's memory pool resources manually first. 270