D-Link DGS-3620-52T CLI Guide - Page 840
config pim6 keepalive_period
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 840 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config pim6 register_suppression_time Parameters register_suppression_time - Specifies the period during which a PIM DR stops sending Register-encapsulated data to the RP after receiving a Register-Stop message. - Enter the register suppression time value here. This value must be between 0 and 65535 seconds. The default value is 60 seconds. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To configure the PIM6-SM register suppression time to be 120 seconds: DGS-3620-28SC:admin# config pim6 register_suppression_time 120 Command: config pim6 register_suppression_time 120 Success. DGS-3620-28SC:admin# 74-22 config pim6 keepalive_period Description This command is used to configure the PIM6-SM multicast routing entry Keepalive Timer. This is the period during which the PIM router will maintain (S, G) state in the absence of explicit (S, G) local membership or (S, G) join messages received to maintain it. Format config pim6 keepalive_period Parameters keepalive_period - Specifies the period during which the PIM router will maintain (S, G) state in the absence of explicit (S, G) local membership or (S, G) join messages received to maintain it. - Enter the keep-alive period value here. This value must be between 120 and 65535 seconds. The default value is 210 seconds. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) 835