D-Link DGS-3620-52T CLI Guide - Page 127
create port_group id
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# show egress_flow_meter Command: show egress_flow_meter Flow Meter Information: Profile ID : 1 Access ID : 1 Mode : trTcm / color-blind CIR:1000(Kbps) CBS:2000(Kbyte) PIR:2000(Kbps) PBS:2000(Kbyte) Actions: Conform : Permit Replace DSCP : 11 Counter : enable Exceed : Permit Replace DSCP : 22 Counter : enable Violate : Drop Profile ID : 1 Access ID : 1 Mode : srTcm / color-blind CIR:2500(Kbps) CBS:2000(Kbyte) EBS:3500(Kbyte) Actions: Conform : Permit Counter : enable Exceed : Permit Replace DSCP: 33 Counter : enable Violate : Drop Total Entries: 2 DGS-3620-28SC:admin# 6-8 create port_group id Description This command is used to create a port group. Format create port_group id name Parameters id - Specifies the port group ID. - Enter the port group ID here. This value must be between 1 and 64. name - Specifies the port group name. - Enter the port group name here. This name can be up to 16 characters long. Restrictions Only Administrator and Operator-level users can issue this command. Example To create a port group: 122