D-Link DGS-3620-52T CLI Guide - Page 665
delete mirror group_id
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 665 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide delete - (Optional) Specifies the mirror source ports to be delete source - (Optional) Specifies the source ports used. ports - (Optional) Specifies the list of ports used as source ports. - Enter the list of ports to be used as the source ports here. rx - (Optional) Specifies that only the received packets on the mirror group source ports will be mirrored to the mirror group target port. tx - (Optional) Specifies that only the sent packets on the mirror group source ports will be mirrored to the mirror group target port. both - (Optional) Specifies that both the received and sent packets on the mirror group source ports will be mirrored to the mirror group target port. state - (Optional) Specifies the mirror group state to enable or disable the mirror group function. enable - Specifies that the mirror group state will be enabled. disable - Specifies that the mirror group state will be disabled. Restrictions Only Administrator and Operator-level users can issue this command. Example Configure mirror group 2 with state enable and add source ports 1:4-1:9: DGS-3620-28SC:admin# config mirror group_id 2 state enable add source ports 1:4-1:9 both Command: config mirror group_id 2 state enable add source ports 1:4-1:9 both Success. DGS-3620-28SC:admin# 59-4 delete mirror group_id Description This command is used to delete a mirror group on the Switch. Format delete mirror group_id Parameters - Enter the mirror group ID used here. This value must be between 1 and 4. Restrictions Only Administrator and Operator-level users can issue this command. Example To delete mirror group 3: 660