D-Link DGS-3620-52T CLI Guide - Page 891

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure port bandwidth: DGS-3620-28SC:admin#config bandwidth_control 1-10 tx_rate 1024 Command: config bandwidth_control 1-10 tx_rate 1024 Success. DGS-3620-28SC:admin# 81-2 show bandwidth_control Description This command is used to display the port bandwidth configurations. The bandwidth can also be assigned by the RADIUS server through the authentication process. If the RADIUS server has assigned the bandwidth, then the RADIUS-assigned bandwidth will be the effective bandwidth. Format show bandwidth_control {} Parameters - (Optional) Specify a range of ports to be displayed. Note: If no parameter is specified, the system will display all port bandwidth configurations. Restrictions None. Example To display the port bandwidth control table for ports 1 to 2: DGS-3620-28SC:admin#show bandwidth_control 1-2 Command: show bandwidth_control 1-2 Bandwidth Control Table Port ---- RX Rate (Kbit/sec) ---------- TX Rate (Kbit/sec) ---------- Effective RX (Kbit/sec 886 Effective TX (Kbit/sec