D-Link DGS-3620-52T CLI Guide - Page 363

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters - Specify the DHCP pool name. broadcast - Specify the NetBIOS node type for Microsoft DHCP clients as broadcast. peer_to_peer - Specify the NetBIOS node type for Microsoft DHCP clients as peer_to_peer. mixed - Specify the NetBIOS node type for Microsoft DHCP clients as mixed. hybrid - Specify the NetBIOS node type for Microsoft DHCP clients as hybrid. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the NetBIOS node type: DGS-3620-28SC:admin#config dhcp pool netbios_node_type knicks hybrid Command: config dhcp pool netbios_node_type knicks hybrid Success. DGS-3620-28SC:admin# 23-11 config dhcp pool default_router Description This command is used to specify the IP address of the default router for a DHCP client. Up to three IP addresses can be specified on one command line. After a DHCP client has booted, the client begins sending packets to its default router. The IP address of the default router should be on the same subnet as the client. If the default router is not specified, the default router information will not be provided to the client. If this command is input twice for the same pool, the second command will overwrite the first command. The default router must be within the range the network defined for the DHCP pool. Format config dhcp pool default_router {} {} {} Parameters - Specify the DHCP pool name. - (Optional) Specify the IP address of the default router. Up to three IP addresses can be specified on one command line. Restrictions Only Administrator, Operator and Power-User level users can issue this command. 358