D-Link DGS-3620-52T CLI Guide - Page 653

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters radius - Specify to enable or disable the authorized attributes assigned by the RADIUS server that will be accepted. enable - If specified to enable, the authorized attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the RADIUS server will be accepted if the global authorization status is enabled. The default state is enabled. disable - If specified to disable, the authorized attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the RADIUS server will not be accepted even if the global authorization status is enabled. local - Specify to enable to disable the authorized attributes assigned by the local database. enable - If specified to enable, the authorized attributes assigned by the local database will be accepted if the global authorization status is enabled. The default state is enabled. disable - If specified to disable, the authorized attributes assigned by the local database will not be accepted even if the global authorization status is enabled. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To disable the configuration authorized from the local database: DGS-3620-28SC:admin#config mac_based_access_control authorization attributes local disable Command: config mac_based_access_control authorization attributes local disable Success. DGS-3620-28SC:admin# 57-14 delete mac_based_access_control_local Description This command is used to delete a database entry Format delete mac_based_access_control_local [mac | vlan | vlanid ] Parameters mac - Delete database by this MAC address. - Enter the MAC address here. vlan - Delete database by this VLAN name. - Specify a VLAN name up to 32 characters long. vlanid - Delete database by this VLAN ID. - Specify a VLAN ID value must be between 1 and 4094. 648