D-Link DGS-3620-52T CLI Guide - Page 691
MLD Snooping, Multicast MSM VLAN, Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 691 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 62 MLD Snooping Multicast (MSM) VLAN Commands create mld_snooping multicast_vlan {remap_priority [ | none] {replace_priority}} config mld_snooping multicast_vlan {[add | delete] [member_port | [source_port | untag_source_port ] | tag_member_port ] | state [enable | disable] | replace_source_ipv6 | remap_priority [ | none] {replace_priority}} (1) create mld_snooping multicast_vlan_group_profile config mld_snooping multicast_vlan_group_profile [add | delete] delete mld_snooping multicast_vlan_group_profile [profile_name | all] show mld_snooping multicast_vlan_group_profile {} config mld_snooping multicast_vlan_group [add | delete] profile_name show mld_snooping multicast_vlan_group {} delete mld_snooping multicast_vlan enable mld_snooping multicast_vlan disable mld_snooping multicast_vlan show mld_snooping multicast_vlan {} config mld_snooping multicast_vlan forward_unmatched [disable | enable] 62-1 create mld_snooping multicast_vlan Description This command is used to create an MLD snooping multicast VLAN and implements relevant parameters as specified. More than one multicast VLAN can be configured. Newly created MLD snooping multicast VLANs must use a unique VLAN ID and name, i.e. they cannot use the VLAN ID or name of any existing 802.1q VLAN. Also keep in mind the following conditions: multicast VLANs cannot be configured or displayed using 802.1Q VLAN commands and the multicast VLAN snooping function co-exists with the 802.1q VLAN snooping function. Format create mld_snooping multicast_vlan {remap_priority [ | none] {replace_priority}} Parameters - Specify the name of the multicast VLAN to be created. Each multicast VLAN is given a name that can be up to 32 characters. - Specify the VLAN ID of the multicast VLAN to be created. The range is from 2 to 4094. remap_priority - (Optional) Specify the remap priority here. - Specify the remap priority (0 to 7) to be associated with the data traffic to be 686