D-Link DGS-3620-52T CLI Guide - Page 692
config mld_snooping multicast_vlan
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 692 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide forwarded on the multicast VLAN. none - If none is specified, the packet's original priority will be used. The default setting is none. replace_priority - (Optional) Specify that the packet's priority will be changed by the switch, based on the remap priority. This flag will only take effect when the remap priority is set. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To create an MLD snooping multicast VLAN with the VLAN name mv1 and the VID 2: DGS-3620-28SC:admin#create mld_snooping multicast_vlan mv1 2 Command: create mld_snooping multicast_vlan mv1 2 Success. DGS-3620-28SC:admin# 62-2 config mld_snooping multicast_vlan Description This command is used to configure MLD snooping multicast VLAN parameters. The member port list and source port list cannot overlap. However, the member port of one multicast VLAN can overlap with another multicast VLAN. The multicast VLAN must be created first using the create mld_snooping multicast_vlan command before the multicast VLAN can be configured. Format config mld_snooping multicast_vlan {[add | delete] [member_port | [source_port | untag_source_port ] | tag_member_port ] | state [enable | disable] | replace_source_ipv6 | remap_priority [ | none] {replace_priority}} (1) Parameters - Specify the name of the multicast VLAN to be configured. Each multicast VLAN is given a name that can be up to 32 characters. add - Specify to add a port. delete - Specify to delete a port. member_port - Specify member port of the multicast VLAN. The specified range of ports will become untagged members of the multicast VLAN. - Specify a range of ports to be configured. source_port - Specify source port where the multicast traffic is entering the Switch. - Specify a range of ports to be configured. untag_source_port - Specify the untagged source port where the multicast traffic is entering the Switch. The PVID of the untagged source port is automatically changed to the multicast VLAN. Source ports must be either tagged or untagged for any single multicast VLAN, i.e. both types cannot be members of the same multicast VLAN - Specify a range of ports to be configured. tag_member_port - Specify the tagged member port of the multicast VLAN. 687