D-Link DGS-3620-52T CLI Guide - Page 959
create snmp community, delete snmp community
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 959 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide CommunityView CommunityView 1.3.6.1.6.3 1.3.6.1.6.3.1 Total Entries: 8 DGS-3620-28SC:admin# Excluded Included 89-8 create snmp community Description This command is used to create an SNMP community string. Use an SNMP community string to define the relationship between the SNMP manager and the agent. The community string acts like a password to permit access to the agent on the switch. You can specify one or more of the following characteristics associated with the string: A MIB view, which defines the subset of all MIB objects accessible to the given community; Read and write or read-only permission for the MIB objects accessible to the community. Format create snmp community view [read_only | read_write] Parameters - Specify the community string. The maximum string length is 32 characters. view - Specify the view name of the MIB. The maximum length is 32 characters. - Specify the view name of the MIB. The maximum length is 32 characters. read_only - Specify read-only permission. read_write - Specify read and write permission. Restrictions Only Administrator-level users can issue this command. Example To create an SNMP community string: DGS-3620-28SC:admin#create snmp community dlink view CommunityView read_write Command: create snmp community dlink view CommunityView read_write Success. DGS-3620-28SC:admin# 89-9 delete snmp community Description This command is used to remove a specific community string. 954