D-Link DGS-3620-52T CLI Guide - Page 421
The VLAN ID associated with the R-APS VLAN.
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 421 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config erps raps_vlan [state [enable | disable] | ring_mel | ring_port [west [ | virtual_channel] | east [ | virtual_channel]] | rpl_port [west | east | none] | rpl_owner [enable | disable] | protected_vlan [add | delete] vlanid | sub_ring raps_vlan tc_propagation state [enable | disable] | [add |delete] sub_ring raps_vlan | revertive [enable | disable] | timer {holdoff_time | guard_time | wtr_time }(1)] Parameters - The VLAN ID associated with the R-APS VLAN. state - Specifies the ERPS R-APS VLAN state. enable - Specifies that the ERPS R-APS VLAN state will be enabled. disable - Specifies that the ERPS R-APS VLAN state will be disabled. ring_mel - Specify the ring MEL of the R-APS function. The default ring MEL is 1. - Specify a value between 0 and 7. ring_port - Specify a port participating in the ERPS ring. west - Specify the port as the west ring port. - Specify a port. virtual_channel - Specify the port as a west port on the virtual channel. east - Specify the port as the east ring port. - Specify a port. virtual_channel - Specify the port as an east port on the virtual channel. rpl_port - By default, the node has no RPL port. west - Specify the west ring port as the RPL port. east - Specify the east ring port as the RPL port. none - No RPL port on this node. rpl_owner - By default, the RPS owner is disabled. enable - Specify the device as an RPL owner node. disable - This node is not an RPL owner. protected_vlan - Specify VLANs that are protected by the ERPS function. The R-APS VLAN cannot be the protected VLAN. The protected VLAN can be one that has already been created, or it can be used for a VLAN that has not yet been created. add - Add VLANs to the protected VLAN group delete - Delete VLANs from the protected VLAN group. vlanid - Specify a VLAN ID list. - Specify a range of VLAN IDs. sub_ring - Specifies the sub-ring configuration. raps_vlan - Specify the R-APS VLAN. - Enter the R-APS VLAN ID used here. tc_propagation - Specifies to configure the state of the topology change propagation for the sub-ring. state - Specifies the propagation state of the topology change for the sub-ring. enable - Enable the propagation state of the topology change for the sub-ring. disable - Disable the propagation state of the topology change for the sub-ring. add - Specifies the add a topology change propagation rule. sub_ring - Specifies the sub-ring configuration information. raps_vlan - Specify the R-APS VLAN - Enter the R-APS VLAN ID used here. delete - Specifies the delete a topology change propagation rule. sub_ring - Specifies the sub-ring configuration information. raps_vlan - Specify the R-APS VLAN. - Enter the R-APS VLAN ID used here. revertive - Specifies the revertive mode state. enable - Specifies that the revertive mode will be enabled. disable - Specifies that the revertive mode will be disabled. timer - Configure the ERPS timers for a specific R-APS VLAN. 416