D-Link DGS-3620-52T CLI Guide - Page 179
config bgp neighbor filter
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config bgp neighbor map [ | peer_group ] {unsuppress_map [add | delete] | route_map [in | out] [add | delete] }(1) Parameters - Specifies the IP address of the neighbor to be configured. peer_group - Specifies the peer group to be configured. - Enter the peer group name here. This name can be up to 16 characters long. unsuppress_map - (Optional) Name of a route map used to selectively advertise routers previously suppressed by the aggregate_address command. add - Specifies that a route map will be added. delete - Specifies that a route map will be deleted. - Enter the unsurpress map name here. This name can be up to 16 characters long. route_map - (Optional) Specify the route map to be applied to the incoming or outgoing routes. in - Specifies the incoming routes from the neighbor. out - Specifies the outgoing routes sent to the peer. add - Specifies that a route map will be added. delete - Specifies that a route map will be deleted. - Enter the unsurpress map name here. This name can be up to 16 characters long. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example This example shows how to configure the unsuppress map of peer group "Campus" to Profile1: DGS-3620-28SC:admin# config bgp neighbor map peer_group Campus unsuppress_map add Profile1 Command: config bgp neighbor map peer_group Campus unsuppress_map add Profile1 Success. DGS-3620-28SC:admin# 12-28 config bgp neighbor filter Description The command is used to configure the filter related setting for a BGP neighbor. filter_list: If the filter_list doesn't exist or does exist but have no filter entry, it means deny any. prefix_list: If the prefix_list doesn't exist, it means deny any. If the prefix_list does exist but have no filter entry defined, it will permit all. capability_orf_prefix_list: BGP Outbound Route Filter Capability allows one BGP router to install its configured inbound prefix_list filter on to the remote BGP router. This is used for reducing the 174