D-Link DGS-3620-52T CLI Guide - Page 887
show dot1v_protocol_group, config port dot1v ports
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 887 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 80-4 show dot1v_protocol_group Description This command is used to display the protocols defined in protocol groups. Format show dot1v_protocol_group {group_id | group_name } Parameters group_id - (Optional) Specify the group ID to be displayed. - Specify the group ID to be displayed. group_name - (Optional) Specify the name of the protocol group. - Specify the name of the protocol group. The maximum length is 32 characters. Note: If no parameter is specified, all configured protocol groups will be displayed Restrictions None. Example To display protocol group ID 4: DGS-3620-28SC:admin# show dot1v_protocol_group group_id 4 Command: show dot1v_protocol_group group_id 4 Protocol Group ID --------4 Protocol Group Name General Group Frame Type -----------EthernetII Protocol Value -----------86dd Total Entries: 1 DGS-3620-28SC:admin# 80-5 config port dot1v ports Description This command is used to assign the VLAN for untagged packets ingress from the portlist based on the protocol group configured. This assignment can be removed by using the delete protocol_group option. When priority is not specified in the command, the port default prority will be the priority for those untagged packets classified by the protocol VLAN. 882