D-Link DGS-3620-52T CLI Guide - Page 367

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config dhcp ping_timeout Parameters - Specify the amount of time the DHCP server must wait before timing out a ping packet. The default value is 100. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the time out value for ping packets: DGS-3620-28SC:admin#config dhcp ping_timeout 500 Command: config dhcp ping_timeout 500 Success. DGS-3620-28SC:admin# 23-17 create dhcp pool manual_binding Description This command is used to specify the distinct identification of the client in dotted-hexadecimal notation or hardware address. An address binding is a mapping between the IP address and MAC address of a client. The IP address of a client can be assigned manually by an administrator or assigned automatically from a pool by a DHCP server. The IP address specified in the manual binding entry must be in a range within that the network uses for the DHCP pool. If the user specifies a conflict IP address, an error message will be returned. If a number of manual binding entries are created, and the network address for the pool is changed such that conflicts are generated, those manual binding entries which conflict with the new network address will be automatically deleted. Format create dhcp pool manual_binding hardware_address {type [ethernet | ieee802]} Parameters - Specify the DHCP pool name. - Specify the IP address which will be assigned to a specified client. hardware_address - Specify the hardware MAC address. - Enter the MAC address here. type - (Optional) Specify the DHCP pool manual binding type. ethernet - Specify Ethernet type. 362