D-Link DGS-3620-52T CLI Guide - Page 373
show dhcp_server, clear dhcp conflict_ip
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 373 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 23-25 show dhcp_server Description This command is used to display the current DHCP server configuration. Format show dhcp_server Parameters None. Restrictions None. Example To display the DHCP server status: DGS-3620-28SC:admin#show dhcp_server Command: show dhcp_server DHCP Server Global State: Disabled Ping Packet Number : 2 Ping Timeout : 100 ms DGS-3620-28SC:admin# 23-26 clear dhcp conflict_ip Description This command is used to clear an entry or all entries from the conflict IP database. Format clear dhcp conflict_ip [ | all] Parameters - Specify the IP address to be cleared. all - Specify that all IP addresses will be cleared. Restrictions None. 368
xStackĀ® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
368
23-25
show dhcp_server
Description
This command is used to display the current DHCP server configuration.
Format
show dhcp_server
Parameters
None.
Restrictions
None.
Example
To display the DHCP server status:
DGS-3620-28SC:admin#show dhcp_server
Command: show dhcp_server
DHCP Server Global State: Disabled
Ping Packet Number
: 2
Ping Timeout
: 100 ms
DGS-3620-28SC:admin#
23-26
clear dhcp conflict_ip
Description
This command is used to clear an entry or all entries from the conflict IP database.
Format
clear dhcp conflict_ip [<ipaddr> | all]
Parameters
<ipaddr>
- Specify the IP address to be cleared.
all
- Specify that all IP addresses will be cleared.
Restrictions
None.