D-Link DGS-3620-52T CLI Guide - Page 766
config ospf host_route, delete ospf host_route
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 766 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To create an OSPF host route: DGS-3620-28SC:admin# create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Command: create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Success. DGS-3620-28SC:admin# 69-11 config ospf host_route Description This command is used to configure an OSPF host route. Format config ospf host_route {area | metric }(1) Parameters - Enter the host's IP address used here. area - (Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. - Enter the area ID value here. metric - (Optional) Specifies a metric that will be advertised. - Enter the metric value used here. This value must be between 1 and 65535. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure an OSPF host route: DGS-3620-28SC:admin# config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Command: config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Success. DGS-3620-28SC:admin# 69-12 delete ospf host_route Description This command is used to delete an OSPF host route. 761