D-Link DGS-3620-52T CLI Guide - Page 992

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide pkey.der Success. DGS-3620-28SC:admin# 92-2 enable ssl Description This command is used to enable the SSL status and its individual cipher suites. Using the enable ssl command will enable the SSL feature, which means SSLv3 and TLSv1. Each cipher suite must be enabled by this command. Format enable ssl {ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA | DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5}(1)} Parameters ciphersuite - (Optional) This is used for configuring a cipher suite combination. RSA_with_RC4_128_MD5 - Indicate an RSA key exchange with RC4 128 bits encryption and MD5 hash. RSA_with_3DES_EDE_CBC_SHA - Indicate an RSA key exchange with 3DES_EDE_CBC encryption and SHA hash. DHE_DSS_with_3DES_EDE_CBC_SHA - Indicate a DH key exchange with 3DES_EDE_CBC encryption and SHA hash. RSA_EXPORT_with_RC4_40_MD5 - Indicate an RSA_EXPORT key exchange with RC4 40 bits encryption and MD5 hash. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To enable the SSL ciphersuite for RSA_with_RC4_128_MD5: DGS-3620-28SC:admin# enable ssl ciphersuite RSA_with_RC4_128_MD5 Command: enable ssl ciphersuite RSA_with_RC4_128_MD5 Success. DGS-3620-28SC:admin# To enable SSL: DGS-3620-28SC:admin# enable ssl Command: enable ssl Note: Web will be disabled if SSL is enabled. Success. 987