D-Link DGS-3620-52T CLI Guide - Page 746
config syslog source_ipif
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 746 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Note: If no parameter is specified, all hosts will be displayed. Restrictions None. Example To display syslog host configurations: DGS-3620-28SC:admin#show syslog host Command: show syslog host Syslog Global State: Disabled Host 1 IP Address Severity Facility UDP port Status : 10.1.1.2 : Warning : Local10 : 514 : Disabled Host 2 IP Address Severity Facility UDP port Status : 3000:501:100:ffff:101:202:303:1 : Emergency : Local10 : 514 : Disabled Total Entries : 2 DGS-3620-28SC:admin# 67-19 config syslog source_ipif Description This command is used to force change the ipif information in syslogs. By default, syslogs will carry the information of the ipif they belong to. Format config syslog source_ipif [ { | } | none] Parameters - Specify the IP interface name. If only this parameter is specified, the IPv4 address and the smallest IPv6 address of ipif_name will be used as source IP addresses. - (Optional) Specify the IP4 address. - (Optional) Specify the IPv6 global address. none - Specify to clear the configured source IP interface. 741