D-Link DGS-3620-52T CLI Guide - Page 866
Precision Time, Protocol PTP, Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 866 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 79 Precision Time Protocol (PTP) Commands enable ptp disable ptp config ptp mode [boundary | p2p_transparent | e2e_transparent] config ptp transport protocol [ethernet | udp] config ptp clock domain_number {unit } {domain_name } config ptp boundary {priority1 | priority2 }(1) config ptp ports [ | all] state [enable | disable] config ptp boundary ports [ | all] {announce [interval | timeout ] | sync_interval [half_second | ] | delay_req_interval | pdelay_req_interval | delay_mechanism [e2e | p2p]}(1) config ptp p2p_transparent ports [ | all] pdelay_req_interval show ptp show ptp clock show ptp clock parent show ptp ports [ | all] show ptp boundary {ports [ | all]} show ptp p2p_transparent ports [ | all] show ptp foreign_master_records ports [ | all] 79-1 enable ptp Description This command is used to enable the PTP function globally. The device will enter the P2Ptransparent clock mode when the PTP global state is enabled. The PTP function can only work when both the global PTP state and the per port PTP state are enabled. Format enable ptp Parameters None. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To enable the PTP function globally: 861