D-Link DGS-3620-52T CLI Guide - Page 664
config mirror group_id
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 664 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config mirror port {[add |delete] source ports [rx | tx | both]} Parameters - Specify the port that will receive the packets duplicated at the mirror port. add - (Optional) Specify the mirror entry to be added. delete - (Optional) Specify the mirror entry to be deleted. source ports - (Optional) Specify the ports that will be mirrored. All packets entering and leaving the source port can be duplicated in the mirror port. - Specify a range of ports to be configured. rx - (Optional) Allow the mirroring of only packets received (flowing into) the port or ports in the port list. tx - (Optional) Allow the mirroring of only packets sent (flowing out of) the port or ports in the port list. both - (Optional) Mirror all the packets received or sent by the port or ports in the port list. Restrictions Only Administrator and Operator-level users can issue this command. Example To add mirroring target port 6 and the source ports 1 to 5 rx and tx packets: DGS-3620-28SC:admin#config mirror port 6 add source ports 1-5 both Command: config mirror port 6 add source ports 1-5 both Success. DGS-3620-28SC:admin# 59-3 config mirror group_id Description This command used to configure mirror group's parameters. It can configure mirror group's target port, state and source ports. The mirror group target port can't be a member of all mirror groups' source ports. Each mirror group's target port can be the same port. But each mirror group's source ports can't overlap. Format config mirror group_id {target_port | [add | delete] source ports [rx | tx | both] | state [enable | disable]} Parameters - Enter the mirror group ID used here. This value must be between 1 and 4. target_port - (Optional) Specifies the port that will receive the packets duplicated at the mirror port. - Enter the target port number used here. add - (Optional) Specifies the mirror source ports to be add. 659