D-Link DGS-3620-52T CLI Guide - Page 247

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide config traffic_segmentation 1-6 forward_list 7-8 config radius delete 1 config radius add 1 10.48.74.121 key dlink default config 802.1x reauth port_based ports all config 802.1x init port_based ports all config 802.1x auth_mode port_based config 802.1x auth_parameter ports 1-50 direction both config 802.1x capability ports 1-5 authenticator show 802.1x auth_configuration ports 1 show 802.1x auth_state ports 1-5 enable 802.1x show 802.1x auth_state ports 1-5 show igmp_snooping enable igmp_snooping DGS-3620-28SC:admin# 16-3 config command_history Description This command is used to configure the number of commands that the switch can record. The switch can keep records for the last 40 (maximum) commands you entered. Format config command_history Parameters - Specify the number of commands (1 to 40) that the switch can record. The default value is 25. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the number of commands the switch can record to the last 20 commands: DGS-3620-28SC:admin#config command_history 20 Command: config command_history 20 Success. DGS-3620-28SC:admin# 242