D-Link DGS-3620-52T CLI Guide - Page 403
Domain Name, System DNS Relay, Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 403 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 28 Domain Name System (DNS) Relay Commands config dnsr [[primary | secondary] nameserver | [add | delete] static ] enable dnsr {[cache | static]} disable dnsr {[cache | static]} show dnsr {static} 28-1 config dnsr Description This command is used to add or delete a static entry into the Switch's DNS resolution table, or set up the relay server. Format config dnsr [[primary | secondary] nameserver | [add | delete] static ] Parameters primary - Specify to indicate that the IP address below is the address of the primary DNS server. secondary - Specify to indicate that the IP address below is the address of the secondary DNS server. nameserver - Specify the IP address of the DNS nameserver. - Specify the IP address of the DNS nameserver. add - Specify to add the DNS relay function. delete - Specify to delete the DNS relay function. static - Specify the domain name of the entry. - Specify the domain name. - Specify the IP address of the entry. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To set IP address 10.24.22.5 as the primary DNS server: DGS-3620-28SC:admin# config dnsr primary nameserver 10.24.22.5 Command: config dnsr primary nameserver 10.24.22.5 Success. 398