D-Link DGS-3620-52T CLI Guide - Page 1008
Subnet VLAN, Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1008 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 96 Subnet VLAN Commands create subnet_vlan [network | ipv6network ] [vlan | vlanid ] {priority } delete subnet_vlan [network | ipv6network | vlan | vlanid | all] show subnet_vlan {[network | ipv6network | vlan | vlanid ]} config vlan_precedence ports [mac_based_vlan | subnet_vlan] show vlan_precedence ports {} 96-1 create subnet_vlan Description This command is used to create a subnet VLAN entry. A subnet VLAN entry is an IP subnet-based VLAN classification rule. If an untagged or priority-tagged IP packet is received on a port, its source IP address will be used to match the subnet VLAN entries. If the source IP is in the subnet of an entry, the packet will be classified to the VLAN defined for this subnet. Format create subnet_vlan [network | ipv6network ] [vlan | vlanid ] {priority } Parameters network - Specify an IPv4 network address. - Specify an IPv4 network address. The format is ipaddress/prefix length. ipv6network - Specify an IPv6 network address. - Specify an IPv6 network address. The format is ipaddress/prefix length. The prefix length of IPv6 network address shall not be greater than 64. vlan - Specify a VLAN name to be associated with the subnet. The VLAN must be an existing static VLAN. - Specify a VLAN name. The maximum length is 32 characters. vlanid - Specify the VLAN ID to be associated with the subnet. The VLAN must be an existing static VLAN. - Specify the VLAN ID between 1 and 4094. priority - (Optional) Specify the priority to be associated with the subnet. - Specify the priority to be associated with the subnet. The range is 0 to 7. Restrictions Only Administrator, Operator and Power-User level users can issue this command. 1003