D-Link DGS-3620-52T CLI Guide - Page 509
<aspath_list>
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 509 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 4294967294. local_preference - Specifies to set the local preference for the matched route. - Enter the local preference value used here. This value must be between 0 and 4294967295. weight - Set the weight for the matched routes. It will overwrite the weight specified by the neighbor weight command for the routes received from the neighbor. If weight is neither specified by the neighbor weight command nor set by the route map, then routes learned through another BGP peer have a default weight of 0. This will only take effect for ingress direction. - Enter the weight value used here. This value must be between 0 and 65535. The default value is 32768. as_path - Specifies an AS path list which is used to prepend the AS list. - Enter the AS path list value used here. community - Specifies a community to be used or to be appended to the original communities of the route. community_set - Specifies a community set used. - Enter the community set value used here. This value can be up to 80 characters long. internet - Specifies that routes with this community will be sent to all peers either internal or external. no_export - Specifies that routes with this community will be sent to peers in the same AS or in other sub autonomous systems within a confederation, but will not be sent to an external BGP (eBGP) peer. no_advertise - Specifies that routes with this community will not be advertised to any peer either internal or external. local_as - Specifies that routes with this community will be sent to peers in the same AS, but will not be sent to peers in other sub-AS's in the same confederation and to the external peers. additive - (Optional) Specifies that the community string will be appended to the original community string. If not specified, the specified community string will replace the original community string. origin - Specifies to set the origin for the route. egp - Specifies that the origin for the route will be set to EGP. igp - Specifies that the origin for the route will be set to IGP. incomplete - Specifies that the origin for the route will be set to 'incomplete'. dampening - Specifies the dampening timer and parameter used. - Enter the dampening time used here. This value must be between 1 and 45 minutes. - Enter the dampening parameter value here. This value must be beteen 1 and 20000. - Enter the dampening parameter value here. This value must be beteen 1 and 20000. - Enter the dampening time used here. This value must be between 1 and 255 minutes. - Enter the dampening time used here. This value must be between 1 and 45 minutes. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure a route map named "map1" and add one sequence ID of 20 to the route map: 504