D-Link DGS-3620-52T CLI Guide - Page 1049
config configuration
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1049 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide - Specify a firmware on the device file system. boot_up - Specify as a boot-up file. Restrictions Only Administrator-level users can issue this command. Example To configure a firmware file to bootup: DGS-3620-28SC:admin#config firmware image 2.00.009.had boot_up Command: config firmware image 2.00.009.had boot_up Success. DGS-3620-28SC:admin# 103-10 config configuration Description This command is used to select a configuration file as the next boot up configuration or to apply a specific configuration to the system. Format config configuration {unit } [boot_up | active] Parameters unit - (Optional) Specifies the unit ID used. - Enter the unit ID used here. - Specifies a configuration file on the device file system. boot_up - Specifies as a boot up file. active - Specifies to apply the configuration. Restrictions Only Administrator-level users can issue this command. Example To configure the specific configuration file as boot up: DGS-3620-28SC:admin#config configuration 1 boot_up Command: config configuration 1 boot_up Success DGS-3620-28SC:admin# 1044