D-Link DGS-3620-52T CLI Guide - Page 150

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# 11-9 enable ipif_ipv6_link_local_auto Description This command is used to enable the auto configuration of link local address when there are no IPv6 addresses explicitly configured. When an IPv6 address is explicitly configured, the link local address will be automatically configured, and the IPv6 processing will be started. When there is no IPv6 address explicitly configured, by default, link local address is not configured and the IPv6 processing will be disabled. By enabling this automatic configuration, the link local address will be automatically configured and IPv6 processing will be started. Format enable ipif_ipv6_link_local_auto [ | all] Parameters - The name of the interface. all - All of the IP interfaces. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To enable the automatic configuration of link local address for an interface: DGS-3620-28SC:admin#enable ipif_ipv6_link_local_auto interface1 Command: enable ipif_ipv6_link_local_auto interface1 Success. DGS-3620-28SC:admin# 11-10 disable ipif_ipv6_link_local_auto Description This command is used to disable the auto configuration of link local address when no IPv6 address is explicitly configured. Format disable ipif_ipv6_link_local_auto [ | all] Parameters - The name of the interface. 145