D-Link DGS-3620-52T CLI Guide - Page 181

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 12-29 show bgp peer_group Description The command is used to show the information of the BGP peer group. Format show bgp peer_group {} Parameters peer_group - (Optional) Name of the BGP peer group. The length is up to 16 bytes. - Enter the BGP peer group name here. This name can be up to 16 characters long. It means to display all the BGP peer groups' information that doesn't specify the peer group name. Restrictions None. (EI Mode Only Command) Example Show the information of the BGP peer group local1: DGS-3620-28SC:admin# create bgp neighbor peer_group local1 Command: create bgp neighbor peer_group local1 Success. DGS-3620-28SC:admin# create bgp neighbor 10.2.2.2 remote_as 10 Command: create bgp neighbor 10.2.2.2 remote_as 10 Success. DGS-3620-28SC:admin# config bgp peer_group local1 add 10.2.2.2 Command: config bgp peer_group local1 add 10.2.2.2 Success. DGS-3620-28SC:admin# show bgp peer_group local1 Command: show bgp peer_group local1 BGP Peer Group :local1 Description : Session : Enabled Session Activity : Enabled Members : 10.2.2.2 Remote AS : Not Set Advertisement Interval : 30 seconds 176