D-Link DGS-3620-52T CLI Guide - Page 80

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions Only Administrator-level users can issue this command. Example To configure 60 seconds for user to input: DGS-3620-28SC:admin#config authen parameter response_timeout 60 Command: config authen parameter response_timeout 60 Success. DGS-3620-28SC:admin# 4-23 config authen parameter attempt Description This command is used to configure the maximum attempts for users trying to login or promote the privilege on console, Telnet, or SSH applications. If the failure value is exceeded, connection or access will be locked. Format config authen parameter attempt Parameters - Specify the amount of attempts for users trying to login or promote the privilege on console, Telnet, or SSH. The default value is 3. Restrictions Only Administrator-level users can issue this command. Example To configure the maximum attempts for users trying to login or promote the privilege to be 9: DGS-3620-28SC:admin#config authen parameter attempt 9 Command: config authen parameter attempt 9 Success. DGS-3620-28SC:admin# 4-24 show authen parameter Description This command is used to display the authentication parameters. 75