D-Link DGS-3620-52T CLI Guide - Page 115
delete egress_access_profile, config egress_access_profile
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 6-2 delete egress_access_profile Description Delete egress access profile command can only delete the profile which is created by egress ACL module. Format delete egress_access_profile [profile_id | profile_name | all] Parameters profile_id - Specifies the index of the egress access list profile. - Enter the profile ID used here. This value must be between 1 and 4. profile_name - Specifies the name of the profile. The maximum length is 32 characters. - Enter the profile name used here. This name can be up to 32 characters long. all - Specifies that the whole egress access list profile will be deleted. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To delete egress access list profile ID 1: DGS-3620-28SC:admin# delete egress_access_profile profile_id 1 Command: delete egress_access_profile profile_id 1 Success. DGS-3620-28SC:admin# 6-3 config egress_access_profile Description This command is used to configure egress access list entries. Format config egress_access_profile [profile_id | profile_name ] [add access_id [auto_assign | ] [ethernet {[vlan | vlan_id ] {mask } | source_mac {mask } | destination_mac {mask } | 802.1p | ethernet_type } | ip {[vlan | vlan_id ] {mask } | source_ip {mask } | destination_ip {mask } | dscp | [icmp {type | code } | igmp {type } | tcp {src_port {mask } | dst_port {mask } | flag [all | {urg | ack | psh | rst | syn | fin}]} | udp {src_port {mask } | dst_port {mask }} | protocol_id 110