Netgear XSM4324FS CLI Manual Software Version 12.x - Page 100

M4300 Intelligent Edge Series Fully Managed Stackable Switches The exec authorization usage scenario is as follows: 1. Configure Authorization Method List aaa authorization exec listname method1 [method2....] 2. Apply AML to an Access Line Mode (console, telnet, SSH) authorization exec listname 3. When the user logs in, in addition to authentication, authorization will be performed to determine if the user is allowed direct access to Privileged EXEC mode. Format Mode aaa authorization {commands | exec} {default | list-name} method1 [method2] Global Config Parameter commands exec default list-name method Description Provides authorization for all user-executed commands. Provides exec authorization. The default list of methods for authorization services. Alphanumeric character string used to name the list of authorization methods. TACACS+, RADIUS, Local, and none are supported. (NETGEAR Switch) # (NETGEAR Switch) #configure (NETGEAR Switch) (Config)#aaa authorization exec default tacacs+ none (NETGEAR Switch) (Config)#aaa authorization commands default tacacs+ none no aaa authorization This command deletes the authorization method list. Format Mode no aaa authorization {commands | exec} {default | list-name} Global Config authorization commands This command applies a command authorization method list to an access method (console, telnet, ssh). For usage scenarios on per command authorization, see the command aaa authorization on page 98. Format Mode authorization commands [default | list-name] Line console, Line telnet, Line SSH Parameter commands Description This causes command authorization for each command execution attempt. Management Commands 100 CLI Command Reference Manual