Netgear XSM4324FS CLI Manual Software Version 12.x - Page 682

M4300 Intelligent Edge Series Fully Managed Stackable Switches show routing heap summary This command displays a summary of the memory allocation from the routing heap. The routing heap is a chunk of memory set aside when the system boots for use by the routing applications. Format Mode show routing heap summary Privileged Exec Parameter Heap Size Description The amount of memory, in bytes, allocated at startup for the routing heap. Memory In Use The number of bytes currently allocated. Memory on Free List The number of bytes currently on the free list. When a chunk of memory from the routing heap is freed, it is placed on a free list for future reuse. Memory Available The number of bytes in the original heap that have never been allocated. in Heap In Use High Water The maximum memory in use since the system last rebooted. Mark Command example: (NETGEAR Switch) #show routing heap summary Heap Size 95053184 Memory In Use 56998 Memory on Free List 47 Memory Available in Heap........ 94996170 In Use High Water Mark.......... 57045 Routing Policy Commands ip policy route-map Use this command to identify a route map to use for policy-based routing on an interface specified by route-map-name. Policy-based routing is configured on the interface that receives the packets, not on the interface from which the packets are sent. When a route-map applied on the interface is changed, that is, if new statements are added to route-map or match/set terms are added/removed from route-map statement, and also if route-map that is applied on an interface is removed, route-map needs to be removed from interface and added back again in order to have changed route-map configuration to be effective. Routing Commands 682 CLI Command Reference Manual