Netgear XSM4324FS CLI Manual Software Version 12.x - Page 283

M4300 Intelligent Edge Series Fully Managed Stackable Switches capture file size Use this command to configure file capture options. The command is persistent across a reboot cycle. The max-file-size argument is the maximum size the pcap file can reach, which is 2 - 512 KB. Format Mode capture file size max file size Global Config capture line wrap This command enables wrapping of captured packets in line mode when the captured packets reaches full capacity. Format Mode capture line wrap Global Config no capture line wrap This command disables wrapping of captured packets and configures capture packet to stop when the captured packet capacity is full. Format Mode no capture line wrap Global Config capture usb This command sets a file name on a USB device as the destination for the capture of CPU packets. Format Mode capture usb filename Global Config show capture packets Use this command to display packets captured and saved to RAM. It is possible to capture and save into RAM, packets that are received or transmitted through the CPU. A maximum 128 packets can be saved into RAM per capturing session. A maximum 128 bytes per packet can be saved into the RAM. If a packet holds more than 128 bytes, only the first 128 bytes are saved; data more than 128 bytes is skipped and cannot be displayed in the CLI. Utility Commands 283 CLI Command Reference Manual