Netgear XSM4324FS CLI Manual Software Version 12.x - Page 306
debug tacacs, debug tacacs packe
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches The following parameters are displayed in the trace message. Parameter TX Intf Source_Mac Version Root_Mac Root_Priority Path_Cost Definition A packet transmitted by the device. The interface that the packet went out on. Source MAC address of the packet. Spanning tree protocol version (0-3). 0 refers to STP, 2 RSTP and 3 MSTP. MAC address of the CIST root bridge. Priority of the CIST root bridge. The value is between 0 and 61440. It is displayed in hex in multiples of 4096. External root path cost component of the BPDU. no debug spanning-tree bpdu transmit This command disables tracing of transmitted spanning tree BPDUs. Format Mode no debug spanning-tree bpdu transmit Privileged EXEC debug tacacs Use the debug tacacs packet command to turn on TACACS+ debugging. Note: To display the debug trace, enable the debug console command. Format Mode debug tacacs {packet [receive | transmit] | accounting | authentication} Global Config Parameter packet receive packet transmit accounting authentication Description Turn on TACACS+ receive packet debugs. Turn on TACACS+ transmit packet debugs. Turn on TACACS+ authentication debugging. Turn on TACACS+ authorization debugging. Utility Commands 306 CLI Command Reference Manual